- tighten nut (P/N 971085-6) with the car resting on its wheels. Tighten to 130 Nm (96 ft.lbs).1982 Volvo 240 L4-2127cc 2.1L SOHC B21F Technical Service Bulletin # 881210 Date:

961201

Body - Template for Modifying Windshield Frame

SECTION

8

Group

81

NO.

210

DATE

Dec. 1996

RE:

Template for modifying

windshield frame

200

REFERENCE: TP 31120/1, SECTION 8(82-88), BODY FITTINGS, INTERIOR HEATING AND A/C 200 1975-19..

Template for modifying windshield frame

1982 Volvo 240 L4-2127cc 2.1L SOHC B21F Copyright ? 2013, ALLDATA 10.52SS Page 52

1982 Volvo 240 L4-2127cc 2.1L SOHC B21F Copyright ? 2013, ALLDATA 10.52SS Page 53

1982 Volvo 240 L4-2127cc 2.1L SOHC B21F Copyright ? 2013, ALLDATA 10.52SS Page 54

1982 Volvo 240 L4-2127cc 2.1L SOHC B21F Copyright ? 2013, ALLDATA 10.52SS Page 55

The replacement part windshield frame is supplied without windshield wiper holes. This Service Bulletin contains templates for marking up holes

and instructions on how to position them correctly

Templates for marking up holes.

Copy templates onto transparent or overhead film.

No. 1: No. 2:

1982 Volvo 240 L4-2127cc 2.1L SOHC B21F Copyright ? 2013, ALLDATA 10.52SS Page 56

Left windshield wiper -1985 flight windshield wiper -1985

No. 3: No. 4:

Left windshield wiper 1985- flight windshield wiper 1985-

Note!

The old windshield frame can be used instead of foil templates.

Warning!

When drilling, protective eyewear should be worn.

Drilling holes with a conical drill

- Position the transparent template (or old windshield

frame) on the new windshield frame.

- Mark out the holes

- Drill guide holes.

- Ream holes to (diameter) 30 mm (1-3/16") using a conical drill.

Do not use a hole saw!

- File off holes before painting.

WARRANTY STATEMENT: Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim

type: O1

Operation no. Labor description Defect code